Panasonic AJ-SD965 Operating Instructions Manual page 47

Setup menus
USER menu
<EDIT>
No./Item
308 The same type of setting as setup menu No.
305. This selects the channel concerned
EDIT RPLCE4 when the CH4 edit preset is set in
compliance with the ON or OFF presetting for
the analog audio signals designated by the
controller.
0000 N-DEF :
Not set.
0001
Compliance with analog CH1 edit preset.
0002
Compliance with analog CH2 edit preset.
0003 CH1+2 :
Compliance with analog CH1 or CH2 edit
preset.
309 The same type of setting as setup menu No.
305. This selects the channel concerned
EDIT RPLCEC when the CUE edit preset is set in
compliance with the ON or OFF presetting for
the analog audio signals designated by the
controller.
0000 N-DEF :
Not set.
0001
Compliance with analog CH1 edit preset.
0002
Compliance with analog CH2 edit preset.
0003 CH1+2 :
Compliance with either analog CH1 or CH2
edit preset.
310 This selects whether to conduct
simultaneous playback while editing is in
CONFI EDIT progress.
0000
0001
<Note>
Simultaneous playback is valid when the MODE
switch is set to TAPE.
311 This selects the connection method for the
digital audio edit IN point.
AUD EDIT IN
0000
0001 FADE : V Fade processing
312 This selects the connection method for the
digital audio edit OUT point.
AUD EDIT OUT
0000
0001 FADE : V Fade processing
313 This selects whether the IN point is to be
entered using the PREROLL button when it
AUTO ENTRY has not been entered.
0000
0001
The underlined items indicates the initial setting.
(continued)
Description
CH1 :
CH2 :
CH1 :
CH2 :
OFF : No simultaneous playback
ON : Simultaneous playback
CUT : Cut processing
CUT : Cut processing
DIS : IN point is not entered.
ENA : IN point is entered.
No./Item
314 This selects the CF adjustment deck with
deck-to-deck editing.
CF ADJ SEL
0000 PLAYER :
The player's edit IN/OUT points are adjusted.
(reference as the RECORDER side)
0001 RECORD :
The recorder's edit IN/OUT points are
adjusted. (reference as the PLAYER side)
315 This selects the mode after cue-up operation
is complete.
AFTER
CUE-UP 0000 STOP : STOP mode
0001 STILL : SHTL STILL mode
0002 STILL2 : SLOW STILL mode
320 This sets the maximum SLOW FWD speed.
VAR FWD MAX 0000 +4.1 : +4.1 (+3.1)a speed
0001 +1.85 : +1.85a speed
0002
<Notes>
OThe value for the DV/DVCAM tape is shown in
parenthesis (
OAt any speed setting other than +4.1, the
phase cannot be synchronized from the
editing controller.
321 This sets the maximum SLOW REV speed.
VAR REV MAX 0000 –4.1 : –4.1 (–3.1)a speed
0001 –1.85 : –1.85a speed
0002
0003 –0.43 : –0.43a speed
<Note>
The value for the DV/DVCAM tape is shown in
parenthesis (
323 This sets the maximum JOG FWD speed.
JOG FWD MAX 0000 +4.1 : +4.1 (+3.1)a speed
0001 +1.85 : +1.85a speed
0002
<Notes>
OThe value for the DV/DVCAM tape is shown in
parenthesis (
OThe maximum speed is set to +1a when the
dial on the front panel is operated.
OAt any speed setting other than +4.1, the
phase cannot be synchronized from an editing
controller which synchronizes the phase using
the JOG command.
Description
+1 : +1a speed
).
–1 : –1a speed
).
+1 : +1a speed
).
47