Edit Menu - Panasonic AJ-D950 Operating Instructions Manual

USER menu
<EDIT>
N o .
308
3 0 9 EDIT
3 1 0
311
312
313
314
315
3 1 6
The underline on the setting item denotes the initial setting.
(continued)
Item Setting
Superimposed Superimposed
No.
display display
0000 N-DEF
EDIT
0001
RPLCE4
0002
0003 CH1+CH2
0000
N-DEF
0001
RPLCEC
0002
0003 CH1+2
000
CONFI
0001
EDIT
0000
AUD EDIT
0001
IN
0000
AUD EDIT
0001
OUT
0000
AUTO
0001
ENTRY
PLAYER
CF ADJ 0000
RECORD
SEL 0001
AFTER 0000
CUE-UP 0001
–43~1
JOG RANGE 0000
–4~+4
0001
- 5 3 -
Description
The same type of setting as No. 305. This selects the channel
CH1 concerned when the VTR CH4 edit preset is set in compliance
with the ON or OFF presetting for the analog audio signals
CH2
designated by the controller.
0: Not set.
1: Compliance with analog CH1 edit preset.
2: Compliance with analog CH2 edit preset.
3: Compliance with analog CH1 or CH2 edit preset.
This selects the channel concerned when the VTR CUE edit
CH1 preset is set in compliance with the ON or OFF presetting for
the analog audio signals designated by the editor or controller.'
CH2
0: Not set.
1: Compliance with analog CH1 edit preset.
2: Compliance with analog CH2 edit preset.
3: Compliance with either analog CH1 ot CH2 edit preset.
OFF
This selects whether to conduct simultaneous playback while
ON editing is in progress.
0: No simultaneous playback
1: Simultaneous playback
<Note>
Simultaneous playback is valid when the TAPE/EE switch is
set to TAPE.
CUT
This selects the connection method for the digital audio edit IN
FADE point.
0: Cut processing
1: V Fade processing
CUT
This selects the connection method for the digital audio edit
FADE OUT point.
0: Cut processing
1: V Fade processing
DIS
This selects whether the IN point is to be entered using the
ENA
PREROLL button when it has not been entered.
0: IN point is not entered.
1: IN point is entered.
This selects the CF adjustment deck with deck-to-deck
editing.
0: The player' s edit IN/OUT points are adjusted. (reference as
the RECORDER side)
1: The recorder' s edit IN/OUT points are adjusted. (reference
as the PLAYER side)
STOP
This selects the mode after cue-up operation is complete.
STILL
0: STOP mode
1: SHTL STILL mode
This sets the range of the JOG speed during 9P remote
operation.
0: Plays at -0.43 to +1 speed range
1: Plays at the ±4.1 speed range