Panasonic AJ-D950 Operating Instructions Manual page 80

RS-232C interface
VTR
Send command
operation
SHTL
[STX] OSR:data [ETX]
REVERSE
data = n: speed data
STANDBY
[STX] OBF [ETX]
OFF
STANDBY
[STX] OBN [ETX]
ON
Return (completion)
message
[STX] OSR [ETX]
0: STILL
1: ×0.03
2: ×0.1
3: ×0.2
4: ×0.5
5: ×1
6: ×1.85
7: ×4.1
8: ×9.5
: This speed differs according to the setting selected for
9: ×16
setup menu No. 101 (SHTL MAX).
A: ×32 : This speed differs according to the setting selected for
setup menu No. 101 (SHTL MAX).
[STX] OBF [ETX]
[STX] OBN [ETX]
- 8 0 -
Supplementary notes
This is the reverse direction shuttle command.
This command is setting the VTR to standby OFF.
This command is setting the VTR to standby ON.