Servo reference setting tables
The servo reference signal is switched as shown in the tables below depending on the servo
reference setting, deck mode and what input signal is available. When the mode is
transferred to editing or recording/playback, the image may be disturbed and the transfer
may be delayed if the references during playback and recording do not match.
During playback or special playback
on the setup menu
No. 304 position
During recording or editing
on the setup menu
No. 304 position
"
"
When " BB" or " CB" is set for the setup menu No. 600 and internal signal generation has been
selected, the REF IN signal serves as the servo reference when the REF IN signal is
provided and the internal sync signal serves as the servo reference when the REF IN signal
is not provided.
SERVO REF
VIDEO IN signal
AUTO
EXIT
SERVO REF
VIDEO IN signal
AUTO
EXIT
denotes that the signal is supplied:
- 6 6 -
Input signal status
REF IN signal
Input signal status
REF IN signal
"
"
denotes that the signal is not supplied.
Reference signal
(servo reference)
REF IN signal
Internal sync signal
REF IN signal
Internal sync signal
REF IN signal
Internal sync signal
REF IN signal
Internal sync signal
Reference signal
(servo reference)
VIDEO IN signal
VIDEO IN signal
REF IN signal
Internal sync signal
REF IN signal
Internal sync signal
REF IN signal
Internal sync signal