Edit Menu - Panasonic DVCPRO50 AJ-D960EG Operating Instructions Manual

Setup menus
USER menu
<EDIT>
No.
301
302
303
304
305
306
307
The underline on the setting item denotes the initial setting.
Item Setting
Superimposed Superimposed
No.
display display
IN/OUT 0000
DEL 0001
NEGA 0000
FLASH 0001
STD/ 0000
NON-STD 0001
0002
SERVO 0000
REF 0001
0002
EDIT 0000
RPLCE1 0001
0002
0003
EDIT 0000
RPLCE2 0001
0002
0003
EDIT 0000
RPLCE3 0001
0002
0003 CH1+CH2
70 (E)
MANU This selects the operation to be performed when an edit point
has been set incorrectly (when the OUT point is before the IN
AUTO
point).
0: Editing is not executed unless the illegal edit point is
cleared or set again properly.
1: The edit points already input are automatically cleared.
This selects whether to show a negative display when the IN
OFF
point is greater than the OUT point.
ON
0: No negative display.
1: Negative display.
AUTO This selects STD or NON-STD in accordance with the compo-
site input signal.
STD
0: Standard/non-standard signals are automatically identified
N-STD
and processed.
1: Standard signals are processed. (Forced STD)
2: Non-standard signals are processed. (Forced NON-STD)
<Note>
Use the non-standard (N-STD) setting when video or audio
trouble occurs with signals from laser discs or a satellite.
This selects the video signal processing.
AUTO
0: Servo is synchronized with the input signal during recording
EXT
and editing, or with the REF signal during playback.
INPUT
1: Servo is synchronized at all times with the REF signal.
2: The servo is synchronized with the input signal at all times.
N-DEF This sets the channel assignments for the controller's
analogue audio preset when editing the digital audio of the
CH1
VTR using a controller which does not have a digital audio edit
CH2
preset control function.
CH1+2
This selects the channel concerned when the VTR CH1 edit
preset is set in compliance with the ON or OFF presetting for
the analogue audio signals designated by the controller.
0: Not set.
1: Compliance with analogue CH1 edit preset.
2: Compliance with analogue CH2 edit preset.
3: Compliance with either analogue CH1 or CH2 edit preset.
N-DEF The same type of setting as setup menu No. 305. This selects
the channel concerned when the CH2 edit preset is set in
CH1
compliance with the ON or OFF presetting for the analogue
CH2
audio signals designated by the controller.
CH1+2
0: Not set.
1: Compliance with analogue CH1 edit preset.
2: Compliance with analogue CH2 edit preset.
3: Compliance with either analogue CH1 or CH2 edit preset.
N-DEF The same type of setting as setup menu No. 305. This selects
the channel concerned when the CH3 edit preset is set in
CH1
compliance with the ON or OFF presetting for the analogue
CH2
audio signals designated by the controller.
0: Not set.
1: Compliance with analogue CH1 edit preset.
2: Compliance with analogue CH2 edit preset.
3: Compliance with either analogue CH1 or CH2 edit preset.
Description