Care And Maintenance; Handling Errors And Problems; Error Messages - Omron MIT Elite plus Instruction Manual

HEM-7301-ITKE_main.book 32 ページ ２０１１年１１月１４日 月曜日 午後２時２４分

Care and maintenance

6.Handling Errors and Problems

6. Handling Errors and Problems
6.1

Error Messages

Error Display
Blinks or appears
continuously
32
Cause
Movement during
measurement
Air plug disconnected.
Arm cuff not applied
correctly.
Clothing is interfering with
the arm cuff.
Air is leaking from the arm
cuff.
The arm cuff was inflated
above 299 mmHg when
inflating the cuff manually.
Battery power is low.
Remedy
Repeat measurement. Remain still
and do not talk during
measurement.
Refer to section 3.3.
Insert the air plug securely.
Refer to section 3.2.
Apply the arm cuff correctly.
Refer to section 3.2.
Remove any clothing interfering
with the arm cuff.
Refer to section 3.2.
Replace cuff with new one.
Refer to Chapter 8.
Remove the arm cuff and take
another measurement.
Refer to section 3.3.
Replace all four "AAA" batteries
with new ones.
Refer to section 2.1.