Care And Maintenance; Error Indicators - Omron HEM-780 Instruction Manual

CARE AND MAINTENANCE

To keep your digital blood pressure monitor in the best condition and
protect the unit from damage follow the directions listed below:
Clean the monitor with a soft dry cloth. Do not use any abrasive or
volatile cleaners. Do not attempt to clean the cuff. Never immerse the
monitor or any components in water.
Store the monitor in a safe and dry location. Do not fold the cuff
and tubing tightly. Do not subject the monitor to extreme hot or cold
temperatures, humidity and direct sunlight.
Avoid subjecting the monitor to strong shocks, such as dropping the
unit on the floor.
Remove the batteries if the unit will not be used for three months or
longer. Always replace all the batteries with new ones at the same time.
Use the unit consistent with the instruction provided in this manual.
Use only authorized parts and accessories.
16

ERROR INDICATORS

Error Symbol
Cuff under-inflated.
Movement during
Measurement
No pulse or blood pressure
reading due to very weak
artery pulse.
Cuff over-inflated (more
than 300 mmHg).
Batteries have run down.
This trouble is caused
by abnormal
memory function.
An Er mark is displayed.
Correction
Cause
Remove arm cuff. Wait 2-3
minutes and take another
measurement. Repeat steps
listed under "How To Take
A Measurement".
Inflate the cuff
40 mmHg higher
than the previous
inflation value.
Carefully read and repeat
steps listed under "How
To Take A Measurement."
Replace all four
"AA" batteries.
Contact Omron
Customer Service Toll
Free: 1-800-634-4350
17