Installing The Expansion Card Riser - Dell PowerEdge R430 Owner's Manual

Figure 50. Removing and installing the expansion card riser
1. expansion card riser
3. guide pin on the system board
5. slot on the chassis
Next steps
1. Install the expansion card riser.
2. Follow the procedure listed in the After working inside your system section.
Related Links
Safety instructions
Before working inside your system

Installing the expansion card riser

After working inside your system
Installing the expansion card riser
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Install the expansion card into the expansion card riser.
Steps
1. Align the following:
2. guide on the expansion card riser
4. riser connector on the system board
6. expansion card latch
125