Memory Specifications; Drive Specifications; Hard Drives; Optical Drive - Dell PowerEdge R430 Owner's Manual

Memory specifications

The PowerEdge R430 system supports DDR4 registered DIMMs (RDIMMs) and load-reduced DIMMs
(LRDIMMs). Supported memory bus frequencies are 1866 MT/s, 2133MT/s, or 2400 MT/s.
Table 22. Memory specifications
Memory module
sockets
Twelve 288–pin

Drive specifications

Hard drives

The PowerEdge R430 system supports SAS, SATA, Nearline SAS hard drives and Solid State Drives (SSDs).
Table 23. Supported hard drive and SSD options for the PowerEdge R430 system
Four hard drive systems
Eight hard-drive systems
Ten hard-drive systems

Optical drive

The PowerEdge R430 system supports one optional SATA DVD-ROM drive or DVD+/-RW drive.
NOTE: The optical drive is supported on the four hard-drive systems and eight hard-drive systems.
38
Memory capacity
• 4 GB single rank
(RDIMMs)
• 8 GB, 16 GB, or 32 GB
dual rank (RDIMMs)
Minimum RAM
• 4 GB with single
processor
• 8 GB with dual
processors (minimum
one memory module
per processor)
Up to four 3.5-inch cabled hard drives, or
Up to four 3.5-inch hot-swappable SAS, SATA, or
Nearline SAS hard drives, or
Up to four 2.5-inch hot-swappable SAS, SATA,
SATA SSD, or Nearline SAS hard drives.
NOTE: Four hard-drive systems support
software RAID. For more information about
software RAID, see the Dell PowerEdge RAID
Controller (PERC) documentation at dell.com/
storagecontrollermanuals.
Up to eight 2.5-inch, hot-swappable SAS, SATA,
SATA SSD, or Nearline SAS hard drives
Up to ten 2.5-inch, hot-swappable SATA hard drive
or SATA SSD
Maximum RAM
• Up to 256 GB with a
single processor
• Up to 384 GB with a
dual processor