Panasonic KX-TVS50 Installation Manual page 244

B6 SYSTEM ADMINISTRATION - SYSTEM PARAMETER SETTINGS
Parameter
Fax No Answer
Time
Fax Manager
Mailbox No.
Fax No Answer
Coverage Mode
Fax Notification
Mode
244
Table 61
Value Range
(Default)
5-60 s Specifies the length of time (in seconds) the VPS must
(10) wait before taking other action when there is no answer at
either fax extension.
Note: This timer applies to the fax call that has been
transferred to the main or alternate fax extension.
2-5 digits Specifies the Fax Manager Mailbox Number. The VPS
(None) will notify the fax manager of the status of fax calls
depending upon the settings of the "Fax No Answer
Coverage Mode" and "Fax Notification Mode "
parameters.
1. No If set to "Mbx", the VPS will leave the number of
2. Mbx unanswered fax calls in the Fax Manager's mailbox.
3. Ext
(No)
Example: "The FAX transfer situation is as follows. One
attempt was no answer."
1)
2)
3)
1. No If set to "Mbx", the VPS will leave the number of
2. Mbx successfully received fax calls in the Fax Manager's
3. Ext mailbox.
(No)
Example: "You have 1 FAX message."
1)
2)
Description/Function
If set to "Ext", the VPS will call the Fax Manager's
extension to specify the number of an unanswered
fax calls received.
If set to "Mbx", the VPS will leave the number of
unanswered fax calls in the Fax Manager's
mailbox.
If set to "No", the VPS will take no action
concerning unanswered fax calls.
If set to "Ext", after a fax extension successfully
receives a fax call, the VPS will automatically call
the Fax Manager's extension and play a voice
prompt - "You have 1 FAXmessage." The VPS will
also leave the total number of received fax calls in
the Fax Manager's mailbox.
If set to "No", the VPS will not take any action
concerning successfully received fax calls.
SYSTEM ADMINISTRATOR'S GUIDE