Panasonic KX-TVS50 Installation Manual page 235

Parameter
Numbering
Plan
1-16
SYSTEM ADMINISTRATOR'S GUIDE
Value Range
(Default)
2-5 digits Specifies the first 1 or 2 digits of the PBX extension
consisting numbers. Up to 16 entries can be added to the list. Each
of 0-9, X entry can contain 2-5 digits of numeric characters, "0-9",
(Numbering Plan and "X" which matches any digit. Extension numbers
1:1 XX cannot begin with "0."
Numbering Plan
2-16: None)
Examples:
a) If valid PBX extension numbers are to be specified 101
through 164 and 201 through 264, specify the numbers
as follows:
b) If valid PBX extension numbers are to be specified 400
through 450 and 3300 through 3399, specify the
numbers as follows:
33XX: Indicates any 4-digit extension starting with
Note:
Auto Configuration will set this parameter automatically.
The Automated Attendant will dial any 2-5 digit PBX
extension number (except numbers beginning with "0")
whether valid or not. If the dialed number is included in the
numbering plan, the Automated Attendant will
immediately send it to the PBX without waiting for further
input. If not included in the plan, the Automated Attendant
will wait until the dialed number is recognized as an
extension number, the internal inter-digit timer expires, or
the caller dials 5 digits.
If the number for an outgoing call is not found on the
Numbering Plan, the VPS will consider it an outside
number. The VPS will then attempt to dial it using the
"Outgoing Call Setup Sequence."
B6 SYSTEM ADMINISTRATION - SYSTEM PARAMETER SETTINGS
Table 54
Description/Function
1XX: Indicates any 3-digit extension number starting
with "1."
2XX: Indicates any 3-digit extension number starting
with "2."
4XX: Indicates any 3-digit extension number starting
with "4."
"33."
235