B6.6 System Caller Name Announcement - Panasonic KX-TVS50 Installation Manual

B6 SYSTEM ADMINISTRATION - SYSTEM PARAMETER SETTINGS
Parameter
Position of
"AM/PM" in
Time Stamp

B6.6 System Caller Name Announcement

Up to 120 Caller ID numbers can be assigned to announce pre-recorded Caller ID caller names
when extension users listen to messages from the assigned numbers left in their mailbox.
Extension users can also hear caller names when calls from the assigned numbers are
transferred to them from the VPS (Caller ID Screening). The recorded caller names will also
be heard when the callers use the Intercom Paging features. The recorded names will be added
to the end of the page.
The Caller ID Screening feature is enabled or disabled in the COS (Class of Service) settings.
This feature is also enabled by selecting "Call Screening" in 4.1 Call Transfer Status in the
Subscriber's Guide.
The Intercom Paging feature is enabled by selecting "Intercom Paging" in 4.1 Call Transfer
Status, and/or in 4.3 Incomplete Call Handling in the Subscriber's Guide.
System Caller Names are recorded by the Message Manager.
To access the proper menu for System Caller Name Announcement, follow the menu
path as shown:
System Administration Top Menu - 1 - 5 - 6
232
Value Range
(Default)
1. Before This parameter setting is functional only when User 1 or
2. After User 2 Prompts are in use. This parameter specifies the
3. 24-h following:
(After)
1. Before - the VPS announces "AM/PM" before the time
2. After - The VPS announces "AM/PM" after the time
3. 24-h - the VPS announces the time in 24-h format (e.g.,
Note: When System Prompts are in use the parameter is set
to "After".
Table 52
Description/Function
(e.g., P.M. 3:42).
(e.g., 3:42 P.M.).
15:42).
SYSTEM ADMINISTRATOR'S GUIDE