This chapter offers some suggestions to solve problems you might encounter. The potential
problems are divided into the following categories.
•
Power, Hardware Connections, and LEDs
•
WRE6606 Access and Login
•
Internet Access
•
Resetting the WRE6606 to Its Factory Defaults
•
Wireless Problems
14.1 Power, Hardware Connections, and LEDs
The WRE6606 does not turn on. None of the LEDs turn on.
Make sure the WRE6606 is plugged in to an appropriate power source. Make sure the power source
1
is turned on.
Disconnect and re-connect the WRE6606.
2
Remove the WRE6606 from the outlet. Then connect an electrical device that you know works into
3
the same power outlet. This checks the status of the power outlet.
If the problem continues, contact the vendor.
4
One of the LEDs does not behave as expected.
Make sure you understand the normal behavior of the LED. See
1
Make sure you understand how the LEDs are enabled or disabled. See
2
Check the hardware connections. See the Quick Start Guide.
3
Inspect your cables for damage. Contact the vendor to replace any damaged cables.
4
Disconnect and re-connect the WRE6606.
5
If the problem continues, contact the vendor.
6
C
HAPTER
Troubleshooting
WRE6606 User's Guide
95
1 4
Section 1.3 on page
10.
Section 1.3 on page
10.