Wre6606 Access And Login - ZyXEL Communications WRE6606 User Manual

14.2 WRE6606 Access and Login

I forgot the password.
The default password is 1234.
1
If this does not work, you have to reset the device to its factory defaults. See
2
98.
I cannot see or access the Login screen in the Web Configurator.
Make sure you are using the correct address.
1
• The default web address (URL) of the WRE6606 is http://zyxelsetup.
Check the hardware connections, and make sure the LEDs are behaving as expected. See the Quick
2
Start Guide.
Make sure your Internet browser does not block pop-up windows and has JavaScript and Java
3
enabled.
Reset the device to its factory defaults, and try to access the WRE6606 with the default address.
4
If the problem continues, contact the network administrator or vendor, or try one of the advanced
5
suggestions.
Advanced Suggestions
• If your computer is connected wirelessly, use a computer that is connected to a LAN/ETHERNET
port.
I can see the Login screen, but I cannot log in to the WRE6606.
Make sure you have entered the password correctly. The default password is 1234.
1
This can happen when you fail to log out properly from your last session. Try logging in again after
2
5 minutes.
Disconnect and re-connect the WRE6606.
3
If this does not work, you have to reset the device to its factory defaults. See
4
98.
Chapter 14 Troubleshooting
WRE6606 User's Guide
96
Section 14.4 on page
Section 14.4 on page