Triscroll 600 Series Vacuum Pump; Pump Models And Power Cords; Circuit Breaker Requirements - Agilent Technologies TriScroll 600 Series Installation And Operating Manual

Table 1 lists the available TS-600 pump models and
indicates the power cord to be used with each particular
pump.
Pump Model Motor Voltage
PTS06001UNIV 100-115 VAC
PTS06001UNIVEU 200-230 VAC
PTS06001UNIVUK 200-230 VAC
PTS06003UNIV 200-230 VAC
PTS06101UNIV 100-115 VAC
PTS06001UVPI 100-115 VAC
Circuit Breakers
Protect against short circuits by
WARNING
installing a circuit breaker of the
proper capacity.
Table 2 lists the circuit breaker capacity required for pump
motors of various voltages, single and three-phase.
Table 2

Circuit Breaker Requirements

Single Phase Motor 100-115 VAC
Breaker capacity 20 Amperes
Three Phase Motor 200-230 VAC
Breaker capacity 10 Amperes

TriScroll 600 Series Vacuum Pump

Table 1

Pump Models and Power Cords

Plug Type
NEMA 5-15P
CEE 7/7
BS 1363
-
NEMA 5-15P
NEMA 5-15P
200-230 VAC
50/60 Hz 50/60 Hz
10 Amperes
380-415-460 VAC
5 Amperes
Three phase pumps are shipped without a power cord.
A three phase power cable kit, Agilent part number
S4789001, is available. This kit does not include a plug.
Fusing Conductor
Size
- 14 Gage
- 3x1.50 mm
BS 1362 3x1.50 mm
13 Amp
- -
- 14 Gage
- 14 Gage
Cord Marking
Length
UL/CSA 2.5 m
2
<HAR> 2.5 m
2
<HAR> 2.5 m
- -
UL/CSA 2.5m
UL/CSA 2.5m
Cord
3