IBM 11000 VA LCD 5U Installation And Maintenance Manual page 71

3. Click OK. The computer creates a communication connection.
4. Click Call, and then click Disconnect.
5. Click File -> Properties. Set the computer ASCII settings as shown in the
following illustration.
6. Type GH and press Enter.
The UPS replies with a list of events that includes the event type, ID, date and
time, and name. For example:
Alarm #199 03/10/2010 10:55:38
Notice #025 03/09/2010 08:30:40
Event #181 03/09/2010 07:29:39
7. Right-click the text that you want, and click Copy. The list of events is copied to
your computer clipboard.
8. Press Ctrl+V to paste the text into an email or document.
Battery Disconnected
Output Overload
UPS Control Power ON
Chapter 6. Troubleshooting
57