Specifications - IBM 11000 VA LCD 5U Installation And Maintenance Manual

Specifications

The specifications of the UPS and the extended battery module are shown in the
following tables.
Note: All dimensions include the front bezel.
Table 1. 11000 VA LCD 5U rack UPS specifications
Specification
Height
Width
Depth
Weight (including the internal batteries)
Operating temperature at 0 to maximum altitude
24 hour transport storage temperature at 0 to
maximum storage altitude
Extended storage temperature at 0 to maximum
storage altitude
Maximum operating altitude
Maximum storage altitude
Relative humidity
Nominal input voltage
Maximum RMS current (in normal mode, battery
fully charged)
Input voltage range for main operations (V ac)
Nominal output voltage (V ac)
Input frequency
Rated power output
Output power capacity in watts
Circuit breakers
Fixed power cord
Input connection type
Power outlets
Audible noise at 1 meter for > 80% load
Runtime (for fully charged internal batteries at 25°C) Full load (10 kW): 4.25 min
4
11000 VA UPS and 11000 VA EBM: Installation and Maintenance Guide
11000 VA LCD 5U rack UPS (200 V / 208 V / 230 V)
212 mm (8.3 in.)
483 mm (19 in.)
740 mm (29.1 in.)
99 kg (218 lb)
0°C to 40°C (32°F to 104°F)
-15°C to 60°C (5°F to 140°F)
-15°C to 45°C (5°F to 113°F)
3048 m (10,000 ft)
15,240 m (50,000 ft)
0 to 95% noncondensing
200 V / 208 V / 230 V (auto sensing at first power-up)
59.3 amps (200 V)
59.0 amps (208 V)
58.4 amps (230 V)
184 to 276 V ac
200 V / 208 V / 230 V (auto sensing at first power-up; user
configurable)
50/60 Hz ± 3 Hz (auto sensing)
11000 VA (Normal and High Efficiency modes)
5500 VA (Converter mode)
10000 W (Normal and High Efficiency modes)
5000 W (Converter mode)
Four two-pole output breakers rated at 20 A (two each for
Load Segment 1 and Load Segment 2)
Hard-wired
Terminal block
Eight IEC 320 - C19
<55 dBA normal / Bypass mode
<55 dBA Battery mode
9 kW: 5 min
8 kW: 6.5 min
7 kW: 8 min
Half load (5 kW): 14 min