Table of Contents
Advertisement
Function board
Description
Function board
Function board cable (included in Cable Kit)
Before removing the function board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
Service doors (see
b.
Optical drive
c.
Hard drive
d.
Keyboard (see
e.
Top cover (see
f.
USB/audio board (see
Remove the function board:
1.
Position the top cover upside-down.
2.
Disconnect the cable from the connector on the function board (1).
3.
Remove the Phillips PM2.0×3.0 screw (2) that secures the board to the top cover.
58
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page
Service doors on page
(Optical drive on page
35)
(Hard drive on page
37)
Keyboard on page
43)
Top cover on page
48)
USB/audio board on page
32).
33)
56)
Spare part number
828419-001
828418-001
Advertisement
Table of Contents
