X7 250ie
Starter motor
KEY
1. Battery
2. Fuse No. 2
3. Key switch contacts
4. Fuse No. 10
5. Stop button on rear brake
6. Stop button on front brake
7. Injection ECU
8. Starter button
9. Start-up remote control switch
10. Starter motor
WARNING
ALL CONTINUITY TESTS MUST BE CARRIED OUT WITH THE CORRESPONDING CONNECTORS
DISCONNECTED.
If the starter motor does not operate correctly, proceed as follows:
1) Check the continuity of the Red cable between the battery and the start-up remote control switch.
Also check continuity between the latter and the starter motor.
2) Check the starter motor ground connection.
3) Check fuses No. 2 and No. 10.
4) Check key switch contacts.
5) Check stop buttons and the starter button.
Downloaded from
www.Manualslib.com
manuals search engine
Electrical system
ELE SYS - 9