Table of Contents
Advertisement
X7 250ie
For the use of this reference mark, remove the
spark plug and turn the engine in the direction that
is the reverse of the normal direction using a cal-
liper spanner applied to the camshaft command
pulley casing.
Cooling system
Level check
Check coolant when the engine is cold and as in-
dicated in the scheduled maintenance tables, fol-
lowing the steps below.
- Set the vehicle upright on the stand and remove
the cover by undoing screw «A».
- Remove the expansion tank cover «B» by turning
it anticlockwise.
- Look inside the expansion tank and check that
the level is between MIN and MAX. Top up if the
coolant is below the MIN level.
If the level is not correct, proceed to top-up when
the engine is cold. If it is necessary to top up the
coolant frequently, or if the expansion tank is com-
pletely dry, you should look for the cause in the
cooling system.
WARNING
Downloaded from
www.Manualslib.com
manuals search engine
Maintenance
MAIN - 11
Advertisement
Table of Contents
