Checking The Valve Clearance; Cooling System - PIAGGIO Beverly Tourer 125 Service Station Manual

Beverly Tourer 125

Checking the valve clearance

-To check valve clearance, centre the reference
marks of the timing system.
- Use a thickness gauge to check that the clear-
ance between the valve and the set screw corre-
sponds with the indicated values. When the valve
clearance values, intake and drainage respective-
ly, are different from the ones indicated below,
adjust them by loosening the lock nut and operate
on the register with a screwdriver as shown in the
figure.
Characteristic
Valve clearance
Inlet: 0.10 mm (when cold)
Outlet: 0.15 mm (when cold)

Cooling system

Level check
Check coolant when the engine is cold and as in-
dicated in the scheduled maintenance tables, fol-
lowing the steps below.
- Set the vehicle upright on the stand and remove
the cover by undoing screw «A».
- Remove the expansion tank cover «B» by turning
it anticlockwise.
Maintenance
MAIN - 45