Step 3 Antenna And Ac Mains Supply Connections - Panasonic SC-HT65 Operating Instructions Manual

Antenna and AC mains supply connections
Supplied
accessories
FM indoor antenna
(included)
Adhesive tape
Fix the end of the antenna where
reception is best.
2
1
LOOP
ANT
GND
3
2
1
Appliance inlet
Approx. 6 mm
Insertion of connector
Even when the connector is perfectly
inserted, depending on the type
of inlet used, the front part of the
connector may jut out as shown in the
drawing. However there is no problem
using the unit.
10
SC-HT65 GN-En.indb 10
AC mains lead
(x 1)
For best reception
FM outdoor antenna
•
•
Black
White
Red
PUSH
The cooling fan operates at high power output levels only.
AC mains lead (included)
Connector
Connect this cord after all other cables are connected.
Household AC mains socket
(AC 230-240 V/50 Hz)
Conserving power
The unit consumes 1 W even when it is turned off with [8]. To save power when
the unit is not to be used for a long time, unplug it from the household AC mains
socket. You will need to reset some memory items after plugging in the unit.
Note
• The included AC mains lead is for use with this unit only. Do not use it with
other equipment.
• Do not use an AC mains lead from any other type of equipment with this unit.
FM indoor antenna
(x 1)
FM outdoor antenna
Disconnect the FM indoor
antenna.
The antenna should be
installed by a competent
technician.
75 Ω coaxial cable
AM loop antenna
Keep the antenna cord away from DVD players and other cords.
DIGITAL
PUSH
TRANSMITTER
AM loop antenna
(x 1)
FM
ANT
75 Ω
AM
ANT
LOOP
EXT
Antenna plug
Click!
AC IN~ AC IN~
8/17/2007 4:20:08 PM