External Unit Connection; Optional Antenna Connections - Panasonic SC-AK20 Operating Instructions Manual

External unit connection
* For details, refer to the instruction manual of the units which are
to be connected.
* This example shows how to connect the analog player with the
PHONO OUT/LINE OUT switch.
* When units other than those described below are to be connected,
please consult with your audio dealer.
Analog player :
(not included)
Rear panel of
this unit
Rm
* Only an analog player with a built-in phono equalizer can be
connected.
* Set the switch to the "LINE OUT" position at.the back of the analog
player.
Optional antenna connections
You may need an outdoor antenna if you use this system in a
mountainous region or inside a reinforced-concrete building, etc.
FM outdoor antenna
Disconnect the FM indoor antenna if an FM outdoor antenna is
installed.
FM outdoor antenna
(not included)
75Q coaxial
a cable (not included)
(D Remove a piece of the outer
vinyl insulator.
t—-
30 mm (13/se")
(2 Twist the shield braid.
COR
Shield braid
(3 Expose the core wire,
15 mm (19/32")
he
CCXXP— -— Core
wire
Note
An outdoor antenna should be installed by a competent technician
only.
Connect the outdoor antenna without removing the AM loop
antenna. Run 5 to 12 m of vinyl-covered wire horizontally along a
window or other convenient location.
[*— 5-12 m —]
(16—40 ft.)
AM outdoor antenna
(not included)
AM loop antenna
(included)
[Note]
When the unit is not in use, disconnect the outdoor antenna to
prevent possible damage that may be caused by lightning. Never use
an outdoor antenna during an electrical storm.
Befo use I