8.
To install a memory module, slide the SODIMM into the socket at approximately a 30° angle (1),
then press the SODIMM down (2) so that the latches lock it in place.
Figure 2-21
NOTE:
the tab on the memory socket.
9.
To replace the access panel, set the panel on the back of the computer, slightly above the stand,
and slide it down into place.
Figure 2-22
10.
Reconnect the power cord and external devices.
11.
Lock any security devices that were disengaged when the access panel was removed.
12.
Turn on the computer. The computer automatically recognizes the additional memory when you
turn on the computer.
Replacing the Battery
The battery is located on the system board on the lower right side of the fan. The battery that comes
with the computer provides power to the real-time clock. When replacing the battery, use a battery
Installing a Memory Module
A memory module can be installed in only one way. Match the notch on the module with
Replacing the Access Panel
Replacing the Battery
25