Using The Record Timer - Panasonic SC-AK58 Operating Instructions Manual

7
6
1, 2, 3
1
2
3
6
7
32
RQT5324
Using the timer

Using the record timer

Preparations
• Switch on the power.
• Make sure that you have completed "Setting the time" on page 13.
2, 3
Set the timer at least 2 minutes before you want to start recording.
The figure shows how to set the record timer for recording from 6:30
p.m. to 8:00 p.m.
1. Press [CLOCK/TIMER] to select "
Every time you press the button;
CLOCK
2. "ON" time setting
(Within 8 seconds or so)
Press [TUNE/TIME ADJ (
the starting time.
Press [CLOCK/TIMER].
3. "OFF" time setting
Press [TUNE/TIME ADJ (
the ending time.
Press [CLOCK/TIMER].
4. Source selection
Select the desired source and then prepare for
recording.
To record from the radio
Press [TUNER BAND] to select the band and tune in the desired
station.
To record the external unit
Press [AUX].
5. Prepare for recording.
1. Insert a tape into deck 2 with the side on which the recording
will start facing you.
2. Select the reverse mode.
Note
Reverse mode does not become part of the timer memory.
6. Press [
Every time you press the button;
PLAY
7. Press [
About 30 seconds before the set time, the system mutes all sound
automatically.
To switch the timer OFF
Press [ PLAY/
PLAY REC Previous display
or
or
PLAY/ REC] to select "
REC (off)
, POWER] to switch off the power.
REC] and check " REC" goes out.
REC".
)] to select
)] to select
REC".