Using The Play/Record Timer; Using The Sleep Timer - Panasonic SC-AK58 Operating Instructions Manual

Using the timer

Using the play/record timer

PLAY
REC
CLOCK
TIMER
If you set the timer incorrectly
Repeat the procedure from step 1.
To check settings
While the unit is on and the "
press [CLOCK/TIMER] so " PLAY" (or "
play.
Two seconds after " PLAY" (or "
displayed in the following order.
• For play timer • For record timer
Play start time
Play end time
Play source
Playback volume
To enjoy the desired source after the timer setting is completed
The volume level and music source are stored in the timer memory and
the timer will start in these preset conditions. However the Disc number
and reverse mode do not get stored in the timer memory.
1. After step 7, turn on the unit and start playing the desired source.
2. Reset the Disc number and reverse mode if you have changed any of
them, confirm that a Disc or cassette is inserted, then press [
POWER] to put the unit on standby.
Turning the timer ON/OFF
One of the timers is on when the [
When the unit is on (or off and NORMAL mode) you can confirm which
is on by checking the indicators on the display.
When the unit is off and in ECO mode, press [CLOCK/TIMER].
The display will then show which timer is on and the settings that have
been made (see above).
To change the timer, press [ PLAY/
Each time the button is pressed the setting changes as follows.
PLAY REC (off)
Note
• If the power is on, the timer will not function. The system must be in
the standby mode.
• If you switch the power to the standby mode while the play/record tim-
er is functioning, the OFF time setting will not be activated.
• If "AUX" is selected as the source, when the timer comes ON, the sys-
tem will turn ON and will engage "AUX" as the source. If you want to
playback or record from a connected component, set the component's
timer to the same time. (See the instruction manual that came with the
component.)
• The play timer cannot be used in combination with the record timer.
PLAY" (or " REC") indicator is on,
REC") appears on the dis-
REC") appears, the settings are
Recording start time
Recording end time
Recording source
PLAY/ REC] button is alight.
REC].

Using the sleep timer

This timer turns power to your system OFF at the set time (Max. 2
hours, settable at 30 minute intervals). It lets you fall asleep listening
to music.
by remote control only
The figure shows how to set the system to standby mode after 30
minutes.
1
4
7 7
PROGRAM PROGRAM
EQ
SLEEP
,
While enjoying the desired source:
Press [SLEEP] to select the desired time.
Every time you press the button;
30 60 90 120
The system is turned off after the set time has elapsed.
To cancel the sleep timer:
Press [SLEEP] to select "OFF".
To confirm the remaining time:
(only while power is ON)
Press [SLEEP].
To change the time remaining during operation:
Press [SLEEP] to show the remaining time then press [SLEEP] to se-
lect the desired time.
Note
• The sleep timer turns OFF automatically the moment you attempt to
edit-record a CD using CD Manager function.
• The sleep timer can be used in combination with the play/record
timer.
The sleep timer always has priority.
Be sure not to overlap timer settings.
AUTO OFF SLEEP MUTING
SLEEP
2 3 DISC
5 6 10
8 9 0
CANCEL CANCEL REPEAT REPEAT RANDOM RANDOM
S.WOOFER
OFF
33
RQT5324