Instrument Panel - Ransomes Highway 2130 Safety, Operation & Maintenance Manual

Ride on reel mower
Hide thumbs Also See for Highway 2130:
Table of Contents

Advertisement

Available languages

Available languages

6
CONTROLS

6.13 INSTRUMENT PANEL

A.
ENGINE PREHEAT INDICATOR LAMP
Colour green, on when the ignition switch is turned
clockwise to the pre-heat position. Once the lamp
goes out the engine can be started.
B.
ENGINE TEMPARATURE GUAGE
Indicates current temparature of engine, whilst
running.
C.
ENGINE OVERHEAT WARNING LAMP
Colour red, on when the engine temperature reaches
a preset level. If the lamp comes on and a warning
horn is sounded bring to machine to a stop,
disengage the cutting cylinders, apply the parking
brake and allow the engine to cool by running the
engine at half speed for two minutes before stopping
and investigating the cause.
D.
CHARGING WARNING LAMP
Colour red, on when ignition is switched on and will go
out when the engine is started. If the light comes on while
the engine is running, the fan belt may be slipping or
broken or a fault in the electrical system is indicated and
should be investigated. STOP IMMEDIATELY.
E.
ENGINE OIL PRESSURE WARNING LAMP
Colour red, on when the ignition is switched on, and will
go out once the engine has started. If the light comes on
while the engine is running - STOP IMMEDIATELY as
this indicates that the engine oil pressure is too low.
Check the level of oil in the sump and top up as
necessary. Check the oil pressure sender switch.
Continued operation may cause extensive damage to the
engine.
F.
4 WHEEL DRIVE IN REVERSE SWITCH
Press and hold the bottom half of the switch to
engage 4 wheel drive when reversing. (Where
fitted). This function only operates when in cutting
mode.
G.
HEAD LIGHT/SIDE LIGHT
Depress the bottom half of the switch to turn on the
headlights and sidelights. (Where fitted)
H.
DIRECTIONAL INDICATORS
Depress left hand-side of switch to signal left, and
right hand-side of switch to signal right. (Where
fitted)
I.
HAZARD WARNING LIGHTS.
Press the top half of the switch to turn on the hazard
warning lights. (Where fitted)
en-24
RANSOMES HIGHWAY 2130
SAFETY AND OPERATORS MANUAL

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents