Specifications - Panasonic WR-201E Design Handbook

PRODUCTS
4
WA-MA120N/WA-MA240N

SPECIFICATIONS

Model No.
Power Source
Power Consumption (AC) Non-operation mode
(standby)
Under normal operating
conditions according to
IEC60065
With rated output signal
Current Consumption (DC) Non-operation mode
(standby)
Under normal operating
conditions according to
IEC60065
With rated output signal
Rated Output
Frequency Response
Distortion
Signal- to-Noise Ratio
Tone Control
Volume Control EMG
Others
Audio Signal Input INPUT 1-3 Audio Signal
Connectors
Control
(Only INPUT 1)
LINE 1,2 Jacks
RM Terminal Audio Signal
(Remote
Microphone Control
Input)
Power
Supply
Connector
TEL PAGING Audio Signal
Terminals Control
(Telephone
Paging Input) Connector
EMG Terminals Audio Signal
(Emergency Control
Equipment
Input) Connector
INS IN Jack (Insertion Input)
ZONE 1 CALL IN
(for 2-channel Announcement)
Audio Signal Output ZONE 1-3, Output Voltage/
DIRECT OUT Impedance
Terminals Connector
48
WA-MA120N WA-MA240N
AC:110 V-120 V or 220 V-240 V (selectable), 50 Hz /60 Hz
DC:+24 V (Battery), M3 screw terminal *1
25 W 30 W
125 W 225 W
360 W 755 W
0.5 A 0.5 A
4.5 A 8.5 A
10 A 20 A
120 W 240 W
50 Hz-15 kHz
Less than 1 % at 1 kHz rated output
More than 60 dB (-22 dBV input to ZONE output)
Bass:±10 dB at 100 Hz, Treble:±10 dB at 10 kHz
0 dB to -20 dB
0 dB to – ∞ (off)
MIC:–65 dBV/LINE:–22 dBV (selectable)
5 kΩ, electronically balanced, XLR-3-11 type connector
(female)
No-voltage make contact input, open voltage:+5 VDC,
short-circuit current:under 1 mA, Push-in terminal
*3
–22 dBV, 10 kΩ, unbalanced, RCA pin jack x2 (monaural)
RM:–22 dBV/MIC:–65 dBV (selectable)
10 kΩ, electronically balanced
No-voltage make contact input, open voltage:+5 V DC, short-
circuit current:under 1 mA
1 CALL (2-channel announcement select)
2 BC (activation control of announcement)
3 ALL CALL (activation control of all-zone announcement)
4 Z1 (zone 1 select)
5 Z2 (zone 2 select)
6 Z3 (zone 3 select)
DC+24 V, MAX 200 mA
(Up to 4 Remote Microphones (WR-210AE) can be connected)
Push-in terminal *3
–22 dBV, 10 kΩ, electronically balanced
No-voltage make contact input, open voltage:+5 V DC,
short-circuit current:under 1 mA
Push-in terminal *3
0 dBV, 10 kΩ, electronically balanced
No-voltage make contact input, open voltage:+5 V DC,
short-circuit current:under 1 mA
Push-in terminal *3
0 dBV, 100 kΩ, unbalanced, RCA pin jack
100 V or 70 V balanced, M3 screw terminal
*2
100 V/83 Ω 100 V/42 Ω
(changeable to 70 V/42 Ω) (changeable to 70 V/21 Ω)
M3 screw terminal *2
Model No.
Audio Signal Output SP4 Ω Impedance
Terminal (Low Connector
Impedance
Loudspeaker
Output)
LINE OUT Jack
REC OUT Jack
INS OUT Jack
(Insertion Output)
INS THRU Jack
(Insertion Through Output)
INPUT D-OUT Jack
(Input Direct Output)
Audio Signal In/Out ALL CALL Audio Signal
for expansion BUS Control
IN/THRU
Connectors Connector
CALL SIGN CNT Terminals
(Activation control of built-in call tones)
OPERATE ON/OFF Terminals
OPERATE LINK Terminal
ATT OVERRIDE Terminals
Announcement Priority Control (Input Priority at 1-Channel
Announcement)
Priority Indicator
PA OUTPUT LEVEL Meter
Other Functions
Phantom Power Supply for INPUT 1-3
Power Supply for External Equipment
Cooling Fan
Operating Temperature
Dimensions
Weight (Approx.)
Finish
Optional Products
0 dB = 1 V
*1 Barrier distance:8.12 mm, Suitable cable gauge:AWG18-14 (Solid)/AWG14 (Stranded)
*2 Barrier distance:6.27 mm, Suitable cable gauge:AWG22-14
*3 Suitable cable gauge:AWG22-14
Dimensions and weight indicated are approximate.Specifications are subject to change without notice.
*
PRODUCTS
WA-MA120N/WA-MA240N
WA-MA120N WA-MA240N
4 Ω
M3 screw terminal *2
0 dBV, 10 kΩ adapted, unbalanced, RCA pin jack
0 dBV, 10 kΩ adapted, unbalanced, RCA pin jack x2
(monaural)
0 dBV, 10 kΩ adapted, unbalanced, RCA pin jack
Through output from INS IN, unbalanced, RCA pin jack
0 dBV, 10 kΩ adapted, unbalanced, RCA pin jack
(Output for 2-channel announcement from INPUT 1 or RM)
–20 dBV balanced
Activation control of all-zone announcement
1 from EMG 2 from TEL/INPUT 1 3 from RM
9-pin female D-sub connector x2 (in/through)
No-voltage make contact input, open voltage:+5 V DC,
short-circuit current:under 1mA, Push-in terminal *3 ,
1:4-Tone (Up), 2:4-Tone (Down), 3:2-Tone (Down)
One-shot make:single playback, at make:repeat playback
No-voltage make contact input, open voltage:+5 V DC, short-
circuit current:under 1 mA, M3 screw terminal *2
Open collector output, withstand voltage:+30 V DC, operating
current:under 50 mA, M3 screw terminal
*2
No-voltage make contact output (transfer type relay),
withstand voltage: 30 V DC, 250 V AC, contact current:under
3A (DC/AC), M3 screw terminal *2
Priority 1:EMG
Priority 2:TEL PAGING, INPUT 1
Priority 3:RM
Priority 4:INPUT 2,3, LINE 1,2
EMG, TEL, RM
5 points, -30/-20/-15/-8/0
• 2-channel announcement by Remote Microphone or paging microphone.
• Zone output extension by connecting plural units. (up to 30 zones by 10 units)
• All-zone announcement in various operating areas. (up to 10 areas)
+16 V, on/off selectable individually
DC+24 V, MAX 200 mA, M3 screw terminal *1
3 modes;Stop/Low speed/High speed
0 °C-+45 °C (32 °F -113 °F)
420 mm (W) x 146 mm (H) x 404 mm (D){13-17/32" (W) x 5-3/4" (H) x 15-29/32" (D)}
(Height includes rubber feet and depth includes projections such as rear protect cover.)
14 kg (30.87 lbs.) 15.5 kg (34.17 lbs.)
Panel:Gun Metallic painting (ABS Resin)
Case: black painting, Munsell N2.5 or equivalent (steel plate)
• Remote Microphone:WR-210AE
• Booster Power Amplifier:WA-BA240N (240 W)
4
49