Table of Contents
Advertisement
CONNECTIONS
3
WR-210AE
Individual Priority
Making connection settings
Refer to the following illustration for connecting up to 4 Remote Microphone. And the priority order of Remote Microphones
depends on the order, in which they are connected to the Mixing Power Amplifier.
Connect the high priority Remote Microphone's priority output to the low priority Remote Microphone's priority input.
Do not connect the priority input and priority output if the priority order setting is not set. Connect the LINE OUT cables in
parallel. Refer to "Mixing Power Amplifier (WA-MA120N/240N) Connection-2" on page 6 and 7 for information about connecting
Remote Microphone to Mixing Power Amplifier (WA-MA120N/240N).
PRIORITY
COM
DC
OUT IN
(0V)
0V
24V
Remote Microphone 1
First priority
(Master)
Connections between Mixing Power Amplifiers
Refer to the Operating Instructions of the Mixing Power Amplifier for details.
ALL CALL
ALL CALL
BUS THRU
*1
BUS IN
*2
*2
*3
*3
INS
INS
*4
THRU
IN
*1: Connect the ALL CALL BUS to be able to make all-line all-zone announcements.
Refer to the Operating Instructions of the Mixing Power Amplifier for the specifications for the cables.
*2: Set all the unit count switches for the total number of Mixing Power Amplifiers connected.
Example:
Turn all "3" ON if three units, including masters and slaves, are connected.
*3: Remove the slave's short pin.
Important:
Do not remove the master's short pin. If it is removed, audio will not be output.
*4: Connect INS.
Refer to the Operating Instructions of the Mixing Power Amplifier for the specifications for the cables.
38
Amplifier
Shielded pair cable
LIN OUT
REC OUT
PRIORITY
COM
DC
LIN OUT
REC OUT
PRIORITY
COM
0 dBV
0 dBV
C
H
OUT IN
(0V)
0V
24V
C
H
OUT IN
(0V)
0V
Remote Microphone 2
Remote Microphone 3
Second priority
Third priority
(Slave 1)
ALL CALL
ALL CALL
BUS THRU
*1
BUS IN
*2
*3
INS
INS
*4
THRU
IN
DC
LIN OUT
REC OUT
0 dBV
24V
C
H
(Slave 2)
CONNECTIONS
MEMO
3
39
Hide quick links:
Advertisement
Table of Contents
