Basic Procedure; Mixing Console – Editing The Volume And Tonal Balance - Yamaha CLAVINOVA CVP-701 Owner's Manual

Mixing Console
– Editing the Volume and Tonal Balance –

Basic Procedure

1
Press the [MIXING CONSOLE] button to call up the MIXING CONSOLE
display.
The volume and other settings for each Part are shown via the slider or knob icons.
NOTE
Although the Mixing Console function provides several displays (see next page), the VOL/VOICE display is called up when you first
press the [MIXING CONSOLE] button after turning on the power.
10
2
Use the [A] – [J] buttons to select a parameter, then use the [1] – [8]
buttons to set the value for each part.
The slider or knob shaped parameters can be edited via the [1] – [8] buttons. For
instructions on editing the other parameters, refer to the Reference Manual on the website.
To reset the value, press the same number []/[] buttons simultaneously.
NOTE
When editing one part, you can instantly set the same value for all other parts, by simultaneously holding down one of the [A] – [J]
buttons and using the [1] – [8] buttons (or the DATA ENTRY dial).
3
Use the [MIXING CONSOLE] button to select the target parts, and use the TAB
[L][R] buttons to call up the desired display, then set the values on each part/
display to create the desired sound.
The operation to set the value is the same as in step 2.
100
CVP-701 Owner's Manual
1,3
The Mixing Console gives you intuitive control
over various sonic aspects of the keyboard parts
and Song/Style channels, including volume
balance and the timbre of the sounds. It lets you
adjust the levels and stereo position (pan) of
each Voice to set the optimum balance and
stereo image, and lets you set how the effects are
applied.
3
2