Yamaha CLAVINOVA CVP-701 Owner's Manual page 102

• EQ
• MEQ
• CMP
4
Save your MIXING CONSOLE settings.
 To save the PANEL PART display settings:
Register them to Registration Memory (page 97).
 To save the STYLE PART display settings:
Save them as Style data.
1
2
3
 To save the SONG CH 1 – 8 / 9 – 16 display settings:
First register the edited settings as part of the Song data (SETUP), then save the Song.
1
2
3
4
10
Advanced Features
Refer to the Reference Manual on the website,
Adjusting Panning/Volume:
Changing the Voice:
Editing FILTER parameters:
Editing TUNE parameters:
Changing an Effect type:
Editing EQ parameters:
Selecting the Master EQ type:
Editing Master Compressor settings:
102
CVP-701 Owner's Manual
Boosts or attenuates the high and low frequencies bands for each part to correct the tone or
timbre of the sound.
Selects the Master EQ type that is applied to the overall sound, and lets you edit the parameters
for tone control.
This is the Master Compressor setting which determines the dynamics of the overall sound.
Call up the operation display.
[FUNCTION] → TAB[L][R] MENU2 → [A] STYLE CREATOR
Press the [EXIT] button to close the RECORD display.
Press the [I] (SAVE) button to call up the Style Selection display for saving your data, then
save it (page 81).
Call up the operation display.
[FUNCTION] → TAB [L][R] MENU2 → [B] SONG CREATOR
Use the TAB [L][R] buttons to select the SETUP Page.
Press the [7]/[8] buttons.
Press the [I] (SAVE) button to call up the Song Selection display for saving your data, then
save it (page 81).
[MIXING CONSOLE] → TAB [L][R] VOL/VOICE
[MIXING CONSOLE] → TAB [L][R] VOL/ VOICE → [C]/[H] →
[1] – [8] → VOICE buttons → [A] – [J]
[MIXING CONSOLE] → TAB [L][R] FILTER
[MIXING CONSOLE] → TAB [L][R] TUNE
[MIXING CONSOLE] → TAB [L][R] EFFECT
[MIXING CONSOLE] → TAB [L][R] EQ
[MIXING CONSOLE] → TAB [L][R] MEQ
[MIXING CONSOLE] → TAB [L][R] CMP
Chapter 10.