Basic Procedure For Creating A Style - Yamaha Genos Reference Manual

Basic Procedure for Creating a Style

1
Select the desired Style to be used as the basis for the new Style.
2
Call up the Style Creator display via [MENU]  [Style Creator].
3
On the "Basic" display, select the desired Section.
As necessary, make the following settings.
• If you want to create a Style entirely from scratch, touch [Initialize Style] to make the current Style empty.
• If you initialize the Style, set the "Pattern Length" (measure amount of the Source Pattern). After inputting the
value, touch [Execute] to actually enter the changes. Note that if an Audio Style is selected as starting data,
changing the pattern length deletes the corresponding Audio part.
• Set the overall parameters such as "Tempo" and "Beat." The settings here commonly applies to all Sections.
After setting the Beat, touch [Execute] to actually enter the changes.
4
Create the Source Pattern for each channel.
• Realtime Recording
Lets you record the Style by simply playing the keyboard.
• Step Recording
Lets you enter each note individually.
• Style Assembly
Lets you copy various patterns from other preset Styles or Styles you have already created.
5
Edit the already recorded channel data.
• Channel Edit
Lets you edit the MIDI data of the already recorded channels.
• SFF Edit (page
Lets you edit the SFF (Style File Format) related parameters of the already recorded channels other than Rhythm
channels.
• Drum Setup
Lets you edit the rhythm part of the Style, such as changing the sounds of the individual instruments.
6
Repeat steps 3–5 as desired.
7
Touch (Save) to save the created Style.
14
Genos Reference Manual
(page 15)
(page 18)
(page 19)
(page 19)
21)
(page 25)
NOTICE
The created Style will be lost if
you change to another Style or
turn off the power to the instru-
ment without carrying out the
Save operation.