The Functions; Basic Procedure In The Function Display - Yamaha PSR-I500 Owner's Manual

The Functions

The "Functions" provide access to a range of detailed instrument parameters such as
Tuning, Split Point, Voices and Effects. Find the desired item in the Function List on
pages 66–70, and then follow the instructions below.
Basic Procedure in the Function
Display
1
Press the [FUNCTION] button.
2
Press the CATEGORY [<<] and [>>] but-
ton several times until the desired item
appears.
3
Use the dial, the [+/YES] and [-/NO] but-
tons, or the [0]–[9] number buttons to set
the value of the selected function.
To restore the default value, press the [+/YES] and [-
/NO] buttons simultaneously. The one exception to
Function List
Function
Function
Number
Volume
001 Style Volume
002 Song Volume
003 Riyaz Volume
[AUX IN] Audio
004
Volume
[USB TO DEVICE]
005 [USB TO HOST]
Audio Volume
Overall
006 Transpose
007 Tuning
008 Pitch Bend Range
009 Split Point
010 Touch Response
011 Portamento
012 Portamento Time
66
PSR-I500 Owner's Manual
Current item
SplitPnt
009
054
Current Function
number
Display Range/Settings
StyleVol
000–127
SongVol
000–127
RiyazVol
000–127
AuxInVol
000–127
USBInVol 000–127
Transpos
-12–12
Tuning
427.0Hz–453.0Hz
PBRange
01–12
SplitPnt 036–096 (C1–C6)
1 (Soft), 2 (Medium),
TouchRes
3 (Hard), 4 (Fixed)
Port.
ON/OFF
PortTime
000–127
this is the MIDI Initial Send function (Function 057),
which is an operation and not a parameter. For this
function, pressing the [+/YES] button executes the
operation while pressing [-/NO] cancels it.
• Decrement
value by 1
• Cancel
Some Function settings are maintained even if
you turn off the power, and can be transferred to
a computer as Backup Data (page 48).
NOTE
• To exit from a Function display, press the [VOICE],
[STYLE], [SONG] or [RIYAZ] button.
Default
Value
100 Refer to page 62.
100 Refer to page 65.
100 Refer to page 62.
Adjusts the volume of audio playback that is input from the
50
[AUX IN] jack (pages 32, 46).
Adjusts the volume of audio playback that is input from the
100 [USB TO DEVICE] and [USB TO HOST] terminal (pages 40,
47).
00 Refer to page 50.
440.0Hz Refer to page 50.
Sets the range over which you can control pitch by using the
02
[PITCH BEND] wheel (page 50), in semitone increments.
054 (F#2) Refer to page 62.
2 (Medium) Refer to page 51.
OFF Switches Portamento on or off.
064 Sets the Portamento Time.
Direct numeric entry
Press simultane- • Increment
ously to recall the value by 1
default setting. • Execute
Description