Nortel M3901 User Manual page 19

To switch from handset to handsfree:
/
Goodbye
To use headset:
/
Headset
To switch from handsfree to headset:
/
Headset
Your telephone call features
1. Press the
Handsfree
2. Replace the handset.
3. Press the
Goodbye
Connect headset to the headset jack or
the handset jack depending on the
headset type and the telephone you
are using.
Press the Headset
M3904). For the M3902 read the
instructions that came with your
recommended headset.
Note 1: There are amplified and
unamplified headsets that are compatible
with your M3900 Series Telephone. Refer
to Hardware Options for recommended
headset types for you telephone.
Note 2: Access Volume Adjustment in the
Options List to adjust the headset volume
and gain that work best with the headset
type you are using.
Connect headset or put headset on.
Press the Headset Key (M3903 and
M3904). For the M3902 read the
instructions for the headset you are
using.
Note: A Headset Key is used to switch
between the headset and the handset
mode of operation (M3903 and M3904).
The LED lights steadily to indicate you are
in headset mode. The headset LED is dark
(unlit) if you are in handset mode.
Key.
Key to end the call.
Key (M3903 and
11