Graco xtreme Instruction Manual page 25

6. Remove clip (309), and slide coupling cover (307)
up to remove coupling (305).
309
7. Use a wrench to hold tie rod flats to keep rods (306)
from turning. Unscrew nuts (308), and remove lower
(302).
302
308
311164M
307
TI8264a
306
TI8301a
8. Refer to the Xtreme Lower manual (311762) to ser-
vice lower. To service motor, refer to separate motor
manual.
9. Reconnect lower by following disconnect steps in
reverse order.
NOTE: Torque nuts (308) to 50-60 ft-lb (68-81
N•m).
305
Xtreme Lower Removal
25