Advertisement
Chapter 3 Printer Driver
To select offset click [Features - Offset] from the list shown by using the [M] button.
Default is [Off].
Staple
To select the Staple position click [Features - Staple] from the list shown by using the [M]
button.
The settings you can select are as follows:
[None], [Single-Left], [Double Top], [Double Left].
Default is [None].
However, staple setting cannot be made in the following cases:
•
[Finisher] is not selected.
• OHP (Transparency), OHP-Interleave (Blank) or OHP-Interleave (Print) are selected
as the Media Type.
• Such a combination of settings as follows is made:
(Example: Double Left for A3-size paper (portrait)
For details on how to position the Staple, refer to the Instruction Manual of the copier.
Stapling is performed as shown for the following orientations:
2-point stapling not available with papers of B5 size and under.
Single Left (portrait)
Single Left (Landscape) Double Top (Landscape)
Unavailable with B5-size paper
3-16 Print Controller INSTRUCTION MANUAL
Double Top (portrait)
Double Left (portrait)
Double Left (Landscape)
Advertisement
