Avaya 9601 Administering page 96

Administering deskphone options
An individual valid dial plan is any combination of the above characters. If there are multiple valid
dial plans, separate each one from the next using an OR symbol ("|"). If the dial plan text string
begins or ends with an OR symbol, that symbol is ignored. Users cannot modify the dial plan.
Dial plan example:
"[2-4]xxx|[68]xxx|*xx|9Z1xxxxxxxxxx|9z011x+"
where:
• [2-4]xxx: Four-digit dial extensions, with valid extensions starting with 2, 3, or 4;
• [68]xxx: Four-digit dial extensions, with valid extensions starting with 6 or 8;
• *xx: Two-digit Feature Access Codes, preceded by a *;
• 9Z1xxxxxxxxxx: Network Access Code ("9 for an outside line"), followed by dial tone, followed
by any string of 10 digits– typical instance of Automatic Route Selection (ARS) for standard US
long distance number;
• 9z011x+: Network Access Code ("9 for an outside line"), followed by dial tone, followed by at
least one digit – typical instance of Automatic Route Selection (ARS) for US access to
international numbers of unknown, and variable, length.
Additional parameters that affect dialing are as follows:
• COUNTRY - Country of operation for specific dial tone generation.
• PSTN_VM_NUM (PSTN access number for Voice Mail system) - This parameter specifies the
telephone number to be dialed automatically when the deskphone user presses the Messaging
button under a non-AST controller. The deskphone places a PSTN call out from the local office
and back in to the location that houses the voice mail server. Additional codes necessary to
reach a specific user's voice-mail box may also be included. Example 1. SET PSTN_VM_NUM
96135550123
• ENABLE_REMOVE_PSTN_ACCESS_PREFIX - When the deskphone is operating with a non-
AST controller and the value of the parameter is 0, the PSTN access prefix, defined by the
parameter PHNOL, is retained in the outgoing number. If the value is 1, then the PSTN access
prefix is stripped from the outgoing number.
• PHNLAC - A string representing the deskphone's local area code. When set, this parameter
indicates the endpoint's local area code, which along with the parameter
LOCAL_DIAL_AREA_CODE, allows users to dial local numbers with more flexibility. Example:
SET PHNLAC 617
• LOCAL_DIAL_AREA_CODE - A flag indicating whether the user must dial the area code for
calls within same area code regions. When the parameter is 0, the user does not need to dial
the area code; when this parameter is 1, the user needs to dial the area code. When this
parameter is enabled (1), the area code parameter (PHNLAC) should also be configured (i.e.,
not the empty string). Example: SET LOCAL_DIAL_AREA_CODE 1
Example 1 - Setting the parameter configuration:
• SET ENHDIALSTAT 2
• SET PHNOL 27
• SET PHNCC 1
• SET PHNDPLENGTH 7
• SET PHNLDLENGTH 11
Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP Deskphones SIP
96
Comments on this document? infodev@avaya.com
August 2015