Konica Minolta bizhub proc6500 User Manual page 367

7
2
Touch [04 Touch Screen Adjustment].
The Touch Screen Adjustment Screen will be displayed.
3
Touch the "+" symbol at the upper right corner, then lower left corner
on the screen.
The present coordinates will be displayed in the message area of the
screen.
4
Check that the X coordinate and Y coordinate displayed in the first line
of the message area fall within the standard value displayed in the sec-
ond line.
– If the coordinates fall out of the range of the standard value, repeat
the adjustment procedure or contact your service representative.
7-4
Touch Screen Adjustment
bizhub PRO C6500