Konica Minolta bizhub proc6500 User Manual page 277

6
6
Place the test cart on the original glass.
– Place the test chart face down on the original glass with green ar-
row pointing at the left side as shown below, and put about 10
sheets of blank copy paper on top of the chart.
Close the ADF/original cover.
7
Touch [Start] on the screen. The machine starts the adjustment auto-
matically.
The message "Completed" will be displayed.
If an error code (Error 1, 2, or 10) is displayed, check that the test chart
is placed properly.
If any other error code is displayed, please contact your service repre-
sentative.
8
If you want to make readjustments, press [Readjust] to display the pop-
up menu to confirm whether to readjust or not.
9
Repeat the adjustment steps from 3 to 8 until the desired result is ob-
tained.
– Touching [Adj. data reset] will display the Reset Confirmation pop-
up menu. Touch [YES] to reset the adjustment value to the factory
setting, or touch [NO] to cancel.
10
Touch [Return] to restore the Quality Adjustment Menu Screen.
11
If further changes are required, touch the desired key.
6-56
Machine Administrator Setting
bizhub PRO C6500