Cruise Control Set Indicator - Subaru 2008 Impreza Owner's Manual

7-40
Starting and operating
& Cruise control indicator light
Turbo models
Non-turbo models
The cruise control indicator light comes on
when the ignition switch is turned to the
"ON" position and goes out after approxi-
mately 3 seconds.
The light comes on when the "CRUISE"
main switch is pressed.
NOTE
If you press the "CRUISE" main
switch button while turning the ignition
switch "ON", the cruise control func-
tion is deactivated and the cruise
control indicator light flashes. To re-
activate the cruise control function,
turn the ignition switch back to the
"Acc" or "LOCK" position, and then
turn it again to the "ON" position.
If this indicator light and the CHECK
ENGINE warning light/malfunction in-
dicator lamp flash simultaneously dur-
ing driving, have the vehicle checked
by your nearest SUBARU dealer.
& Cruise control set indicator
light
Turbo models
Non-turbo models
The cruise control set indicator light