Troubleshooting - Panasonic KX-TCD820E Operating Instructions Manual

This unit is compatible with caller id and sms.
Hide thumbs Also See for KX-TCD820E:
Table of Contents

Advertisement

Troubleshooting

If you still have difficulties after following the instructions in this section, disconnect the AC
adaptor and turn off the handset, then reconnect the AC adaptor and turn on the handset.
Telephone
Problem
w is flashing.
The handset display is blank.
The handset will not turn on.
The display is dark and displayed
items are very faint.
I have changed the display
language to a language I cannot
read.
Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333
Cause & solution
L The handset is not registered to the base unit.
Register it (page 57).
L The handset is too far from the base unit. Move
closer.
L The AC adaptor is not connected. Check the
connections.
L You are using the handset or base unit in an area
with high electrical interference. Locate the handset
and base unit away from interference sources, such
as antenna and mobile phones.
L The handset is not turned on. Turn the power on
(page 14).
L Make sure that the batteries are installed correctly
(page 13).
L Fully charge the batteries (page 13).
L Clean the charge contacts and charge again (page
13).
L The handset is in screen saver mode (page 14).
L Change the display language (page 15).
Useful Information
65

Advertisement

Table of Contents
loading

Table of Contents