Table of Contents
Advertisement
Base Unit Settings
n
Setting pause length
Change the pause length, if necessary,
depending on the requirements of your
service provider or PBX.
1
" (centre of joystick) i n i #
2
Enter the base unit PIN (default:
"0000").
3
"Call Options" i #
4
"Pause Length" i #
5
Select the desired setting. i # i
{ih}
Setting call restriction
You can restrict selected handsets from
dialling certain numbers. You can assign up
to 6 phone numbers to be restricted, and
select which handsets will be restricted.
Storing area codes here will prevent the
restricted handsets from dialling any phone
number in that area code.
You can allow a call restricted number to be
dialled if it stored as an emergency number.
1
" (centre of joystick) i n i #
2
Enter the base unit PIN (default:
"0000").
3
"Call Options" i #
4
"Call Restrict" i #
5
Set which handsets will be restricted by
selecting the handset then pressing
S.
L Restricted handsets have a "Q" next
to them.
L To turn call restriction off for a handset,
select the restricted handset, then
press S.
6
#
7
Select a memory location. i #
8
Enter the phone number or area code to
be restricted (8 digits max.). i #
i {ih}
38
Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333
L To erase a restricted number, press
{C/T}.
Storing/changing emergency
numbers
If you have set the call restriction feature
(page 38) but want to allow a number to be
dialled that would normally be restricted by
call restriction, store the number as an
emergency number.
1
" (centre of joystick) i n i #
2
Enter the base unit PIN (default:
"0000").
3
"Call Options" i #
4
"Emergency No." i #
5
Select a memory location. i #
6
Enter/edit the number. i # i
{ih}
L To erase an emergency number, press
and hold {C/T}.
Advertisement
Table of Contents
