Step 1 Assembling The Speakers - Panasonic SC-PT870 Operating Instructions Manual

step 1 Assembling the speakers
[PT570] Front speaker
Front and surround speakers
[PT870]
Make sure you have all the indicated components before starting assembly, setup, and connection.
≥Keep the screws out of reach of children to prevent swallowing.
≥For optional wall mount, refer to page 30.
[PT570]
2 Front speakers
[PT870]
2 Front speakers
2 Surround speakers
1
2
Speaker assembly option
Thread the speaker cable
through the base.
You can remove and use
the cable from the stand.
To reattach the cable, refer to page 30.
Preventing the speakers from falling
≥You will need to obtain the appropriate screw eyes to match
the walls or pillars to which they are going to be fastened.
≥Consult a qualified housing contractor concerning the
appropriate procedure when attaching to a concrete wall or a
surface that may not have strong enough support. Improper
attachment may result in damage to the wall or speakers.
e.g. Front speaker
Rear of the
String (not included)
speaker
Thread from the wall to the speaker and tie tightly.
Screw eye
6
(not included)
[PT570]
2 Stands (with cable)
[PT870]
4 Stands (with cable)
Position the
cable between
the ridges.
Leave about 120 mm.
Attach the speaker.
Leave about
120 mm.
Approx.
150 mm
Wall
Preparation
≥To prevent damage or scratches, lay down a soft cloth and
perform assembly on it.
≥For assembly, use a Phillips-head screwdriver (not included).
[PT570] 2 Bases
[PT870]
4 Bases
Slide into the groove.
Tighten securely.
Insert the wire fully.
: White
: Blue
Push!
Press into the groove.
Tighten securely.
Insert the wire
fully.
: White
: Blue
Press into the groove.
Tighten securely.
Slide into
the groove.
Caution
Do not stand on the base. Be cautious when children are
near.
e.g. Front speaker
DO
NOT
[PT570] 8 Screws
[PT870]
16 Screws
2
1
Push!