Step 1 Assembling The Front Speakers [Pt175] - Panasonic SC-PT170 Operating Instructions Manual

step 1 Assembling the front speakers [PT175]
Preparation
≥To prevent damage or scratches, lay down a soft cloth to assemble speakers.
≥For assembly, use a Phillips-head screwdriver (not included).
Make sure you have all the indicated components before starting assembly, setup, and connection.
≥Keep the screws out of reach of children to prevent swallowing.
≥For optional wall mount, refer to page 29.
2 Front speakers
1
2
Speaker assembly option
Thread the speaker cable
through the base.
You can remove and use the cable
from the stand. To reattach the cable,
refer page 29.
Preventing the speakers from falling
≥You will need to obtain the appropriate screw eyes to match
the walls or pillars to which they are going to be fastened.
≥Consult a qualified housing contractor concerning the
appropriate procedure when attaching to a concrete wall or a
surface that may not have strong enough support. Improper
attachment may result in damage to the wall or speakers.
String (not included)
Thread from the wall to the speaker and tie tightly.
Rear of the
6
speaker
Position the
cable between
the ridges.
Leave about 90 mm.
Attach the speaker.
Leave about 100 mm.
Screw eye
Wall
(not included)
2 Stands (with cable)
Slide into the groove.
Tighten securely.
Insert the wire fully.
i: White
j: Blue
Push!
Press into the groove.
Tighten securely.
Insert the wire fully.
i: White
j: Blue
Press into the groove.
Tighten securely.
Caution
Do not stand on the base. Be cautious when children are
near.
Approx.
150 mm
2 Bases
2
1
Push!
Slide into the
groove.
DO
NOT
8 Screws