Setting Up The Radio; Presetting Stations Automatically; Confirming The Preset Channels; Manual Tuning - Panasonic SC-PT870 Operating Instructions Manual

Setting up the radio

PLAY MODE
Numbered
buttons
OK
MENU

Presetting stations automatically

Up to 30 stations can be set.
1
RADIO
EXT-IN
2
MENU
PLAY
LIST
3
OK
(press and hold)
≥"SET OK" is displayed when the stations are set, and
the radio tunes to the last preset station.
≥"ERROR" is displayed when automatic presetting is
unsuccessful. Preset the channels manually (
12
PLAY MODE
1 2 3
4 5 6
7 8 9
0 10
RADIO
RADIO
EXT-IN
, SEARCH
SEARCH SEARCH
,
SKIP SKIP
FUNCTIONS
OK
MENU
-TUNE MODE /—FM MODE
TUNE
SELECTOR
Select "FM".
≥This unit:
Press [SELECTOR].
Each time you press the
button:
LOWEST (factory preset):
To begin auto preset with the
lowest frequency.
CURRENT:
To begin auto preset with the
current frequency.
§
To change the frequency,
§
refer "Manual tuning"
( right).
Release the button when
"FM AUTO" is displayed.
e.g. Display
≥This unit:
Press and hold [MEMORY].
The tuner starts to preset all
the stations it can receive
into the channels in
ascending order.

Confirming the preset channels

1
2
1
4
7
MEMORY
≥The FM setting is also shown on the TV display.
If noise is excessive
Press and hold [PLAY MODE]
(This unit: [—FM MODE]) to
display "MONO".
Press and hold the button again to cancel the mode.
≥The mode is also cancelled when you change the
frequency.

Manual tuning

1
2
SEARCH
13).
Select "FM".
RADIO
≥This unit:
EXT-IN
Press [SELECTOR].
Select the channel.
≥To select a 2-digit number
2 3
e.g. 12: [S10]
5 6
e.g. Display
8 9
0 10
Alternatively, press [X, W].
≥This unit:
Press [-TUNE MODE] to
select "PRESET" on the
display, and then press
[X TUNE W] to select the
channel.
When a stereo FM broadcast
is being received, "ST" lights
in the display.
e.g. Display
Select "FM".
RADIO
≥This unit:
EXT-IN
Press [SELECTOR].
Select the frequency.
SEARCH
≥This unit:
Press [-TUNE MODE] to
select "MANUAL" on the
display, and then press
[X TUNE W] to select the
frequency.
≥To start automatic tuning,
press and hold [6, 5]
(This unit: [X TUNE W])
until the frequency starts
scrolling. Tuning stops
when a station is found.
[1] [2]
e.g. Display
ST
MONO