Table of Contents
Advertisement
1
Assembling the front/surround speakers
STEP
Preparation
≥To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
≥For assembly, use a Phillips-head screwdriver.
≥For optional wall mount, refer to page 6.
Make sure you have all the indicated components before starting assembly, setup, and connection.
2 Front speakers and
2 Surround speakers
Speaker assembly options
Thread the speaker cable through the base.
You can remove and use the cable from the
stand. To reattach the cable, refer to page 6.
2
Positioning
STEP
Caution
≥The main unit and supplied speakers are to be used only as indicated in this setup. Failure to do so may lead to damage to the
amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified service person if damage has occurred or if you
experience a sudden change in performance.
≥Do not attempt to attach these speakers to walls using methods other than those described in this manual.
How you set up your speakers can affect the bass and the sound field.
Note the following points:
≥Place speakers on flat secure bases.
≥Placing speakers too close to floors, walls, and corners can result in
excessive bass. Cover walls and windows with thick curtains.
RQT9252
4
≥2 stands with a red or white speaker cable connector:
For front speakers
≥2 stands with a blue or grey speaker cable connector:
For surround speakers
Speaker label
Do not use a front speaker as a
surround speaker or vice versa.
Verify the type of speaker with the
label on the rear of speaker.
Position the cable
between the ridges.
Leave about 90 mm
Attach the speaker.
Leave about 100 mm
4 Bases
Slide into the groove.
Tighten securely.
Insert the wire fully.
i: White
j: Blue
Push!
Press into the groove.
Tighten securely.
Insert the wire fully.
i: White
j: Blue
Push!
Press into the groove.
Tighten securely.
[Note]
Keep your speakers at least 10 mm away from the system for proper
ventilation.
16 screws
Hide quick links:
Advertisement
Table of Contents
