Height Of Cut - Ransomes EC Hydro Midsize 930325 Safety And Operation Manual

EC

HEIGHT OF CUT

Hydro
Midsize
FIXED CUTTERDECK HEIGHT OF CUT
NOTE: Use only these combinations of settings. If any other setting is used, quality of cut will suffer because
of wrong blade angle. Height of cuts shown on these charts were done in a controlled workshop environ-
ment. Slight variations can occur in the field, depending on tire pressures, etc. Make sure front of blade is
lower than back of blade to prevent double cutting. Adjustment is provided by removing 1/8" washer beneath
caster support.
GB-15