Problem Solving Guide; Check And Fault Messages In The Display - Miele PT 5186 Operating And Installation Instructions

With the help of the following notes minor faults in the performance of the
appliance, some of which may result from incorrect operation, can be put right
without contacting the Service Department.
Repair work to electrical appliances should only be carried out by a suitably
qualified person in strict accordance with current local and national safety
regulations. Repairs and other work by unqualified persons could be
dangerous. The manufacturer cannot be held liable for unauthorised work.

Check and fault messages in the display

Problem
l
Adjust
the load
,
Technical fault.
Call Service Dept.
A fault code, e.g.
F47 also appears.
Possible cause
This is not a fault.
The electronic unit has
recognised that there is no
laundry in the drum and
cancelled the programme.
Drying individual garments or
items which are already dry
can also cause the programme
to be cancelled.
No obvious cause.
In some circumstances, Clean
the airways will have appeared
in the display already.
A programme cannot be
started while there is a fault
message in the display.

Problem solving guide

Remedy
Use the Warm air
programme (timed
drying) to dry individual
items.
To delete the message:
– Open the door.
– See next page: Clean
out airways.
– Make a note of what is
shown in the display.
– Try to start the
programme again.
33