Miele PT 5186 Operating And Installation Instructions page 38

Problem solving guide
Problem
The programme does
not start and the display
is dark.
The display is in a
different language.
The indicator lamp for
the Start button is
flashing when a
programme is being
selected.
The display is dark and
the light ring around the
programme selector is
not lit up.
The Start button light
flashes slowly.
38
Possible cause
No obvious cause.
A different language has
been selected in "Settings
J" "Language J".
This is not a fault.
The flashing indicates
that a programme can be
started.
The display has switched
off automatically to save
energy (Standby mode).
The same applies to the
programme selector.
The programme selector
light goes out when the
Settings menu has been
selected.
If the problem persists,
there is a fault.
Remedy
– Is the dryer switched
on?
– Is the door closed
properly?
– Has the fuse or circuit
breaker tripped?
When the power comes
back on after a power
cut, confirm with OK and
start the programme
again.
Set the language you
want. The flag symbol
will guide you.
Once the programme has
started, the Start button
stops flashing and lights
up constantly.
The display and
programme selector are
lit up after pressing a
button or turning the
programme selector.
The programme selector
light comes on when a
programme is selected.
Contact the Miele Service
Department.