Miele PT 5186 Operating And Installation Instructions page 23

Before the end of a programme
There is a cooling down phase at the
end of the drying sequence: Cooling
down will appear in the display. The
programme is not finished until the
cooling down phase has been
completed.
Do not switch the tumble dryer off
before the end of the drying
programme.
E Remove the laundry when the
programme has finished
Anti-crease (if activated) and Finish will
appear in the display to indicate that
the programme has finished.
It is advisable to remove laundry as
soon as the programme has
finished.
^ Open the door.
Short instructions
^ Remove everything from the drum.
Check that all items have been
removed from the drum. Anything
left in the dryer could be damaged
by overdrying when it is next used.
The drum lighting will come on when
the door is opened. It will go out a few
minutes later to save energy.
^ Press the On/Off button s to switch
off the dryer.
The display will go out.
^ Close the door.
Maintenance after each drying
programme
^ Please see "Cleaning and care" for
details.
23